The shuttle bay was completely custom (01/14/02), and I'm pleased with the results.  In this image you can see the platform (made of copper mesh) and the decals used for doors and the yellow landing zone.  On the opposite wall (not shown in this image) are yellow decals on the walls to represent computer consoles.
 

     A detail image of the AeroShuttle.  While not absolutely perfect, I'm pleased with the way it turned out.

 

 

     Taken by shooting into the mirror below the ship, this shows all detailing on the bottom of the ship including the AeroShuttle, storage bay doors and the defense grids to either side of the primary deflector.

 

     A detail shot of the port nacelle wing taken by shooting into the mirror.  I'm pleased that it shows the impulse engine lights, but displeased that the flat lacquer caused the decals to haze so badly.

 

 

     This picture shows the lighting of the shuttle bay in contrast to the rest of the ship as well as the base and the white running light on the base of the ship.  All other running lights flash at an interval of 2.8 seconds, but this one is constant (3/4/02).