In this section we go over subnetting – don’t worry, it’ll be easier than it sounds.
Browsing: SpreadSpectrum VPN
Spread Spectrum VPN Project
… and now route traffic over the new interfaces.
At this point it should be working – here’s how you can test, what the traffic should look like.
You’re all done, Spread Spectrum is working! Now, here are the rough notes you’ll need to maintain the setup.
I hope this was a helpful series!
Now that you have VPN connections, set them up as interfaces.
At this point you need a place to route packets to – time to get the VPN connections configured in the firewall.
The Spread Spectrum project – what you need to get started so you can start using this.
Some background and definitions are helpful – what is “spread spectrum”?